Thread Tape, PTFE

This PTFE tape comes in as enclosed plastic spool which has an unlimited shelf life. Since it is completely synthetic and inert, it can be used in a multitude of situations including thread sealing on pipes, sprinkler systems, plumbing lines and...

Manhole Gasket, TG, 1/4 in Thk, Texturized Fiberglass Yarns

Darco's manhole and handhole gaskets are manufactured from texturized fiberglass yarns with a brass wire, then coated with a white rubber compound. They make excellent boiler gaskets for high-temp applications.

SEPCO #ML2235 Packing, Yarn Valve, 500 deg F, 1200 fpm Shaft, 0 to 14, Multi-Lok Braid

Unlike other PTFE fluorocarbon filament packing, SEPCO® pre-lubricates the fibers of the ML2235 to provide a softer, more flexible packing with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications,...

SEPCO #ML2225 #ML2225 Packing, Braided, 500 deg F, 1850 fpm Shaft, 3 to 11, Acrylic Fiber

The SEPCO® ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high-temperature lubricant is...

Flange, 4 -Bolt Hole, Weld Neck, Class 150, Raised Face Shape, 316 Stainless Steel

Weldneck flanges are joined to piping systems by butt welding, and are preferred for high stresses to the pipe, reducing stress applications. The neck transmits stress concentration at the base of the flange for reinforcement.

Gasket Sheet, Felt, 36 in Lg, 36 in Wd, -80 to 200 deg F

Southeastern Felt’s gaskets are made of F15 grey felt material. It is a low-density needle-punched material used for gasketing, as well as for spacing and padding between other materials. It is often used for packaging, crating and lining.

Flange, Slip-On, 4 -Bolt Hole, Slip On, Class 150, Raised Face Shape, 304 Stainless Steel

Slip-on flanges slide over the end of piping and are then welded into place to provide sufficient strength and prevent leakage. They are ideal for lower pressure applications, and install faster and easier than other types of flanges.

Flange, Slip-On, Slip On, Class 150, Raised Face Shape, 316L Stainless Steel

Slip-on flanges slide over the end of piping and are then welded into place to provide sufficient strength and prevent leakage. They are ideal for lower pressure applications, and install faster and easier than other types of flanges.

Ring Gasket, 1/16 in Thk, 150 lb

Gaskets and gasket materials are the mainstay of CGR’s line of industrial products. They are made from a wide range of materials, including all basic elastomers and non-asbestos materials. All of CGR’s products are made to your exact specifications and...