Packing

SEPCO's SEPAK is an asbestos-free, non-toxic, PTFE that will not contaminate product flow. It can be used in virtually any valve or gasket application including process lines in food and beverage operations, petroleum refineries and chemical processing...

Pump Seal, 23 to 200 deg C, 10 Bar, SE-750

PUMP SEAL SE-750

Pump Seal, 23 to 200 deg C, 10 Bar, SE-702

PUMP SEAL SE-702

Packing, Steam, 3/8 in, 600 deg F, 500 psi

Sepco’s 151RB packing is made of closely woven cloth which is treated with a heat and oil resistant rubber friction. Built into the packing is a resilient rubber backing which provides a cushion against high pressure. The packing is then lubricated with...

Pump Seal, 23 to 200 deg C

PUMP SEAL PSE800

Packing, 3/4 in, 500 deg F, 1885 fpm Shaft, 0 to 14, Multi-Lok PTFE, White Color

The most severe services. All oxidizers and corrosives with one exception: Molten alkali metals. Use this specially treated PTFE packing where other PTFE filament glazed or gotten hard because of frictional heat due to high speeds and thermal expansion.

Impregnated Packing, 1850 fpm Shaft, 260 deg C

The SEPCO® ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is...

Mechanical Seal, Stationary, 1D527-B15

A stationary seal is a seal design in which the flexible members (such as springs) do not rotate with the shaft but are mounted in the pump housing or gland.

Mechanical Seal, Stationary, D546-A15

A stationary seal is a seal design in which the flexible members (such as springs) do not rotate with the shaft but are mounted in the pump housing or gland.