DORMER Machine Tap, Plug, 1/2-20 Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNF, Plug Chamfer, 0.367 in Shank

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug, 1/4"-20, Spiral Point, Relieved, Aluminum Magnesium, Cast Iron, Copper, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2 -Flute, 6007283

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Round Die, 1/2 in Thk, 1-1/2 in OD Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial, UNC

Adjustable circular split die, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006 in, dimensions according to ANSI...

DORMER Round Die, 3/8 in Thk, 1 in OD Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial, UNC

Adjustable circular split die, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006 in, dimensions according to ANSI...

DORMER Round Die, 5/8 in Thk, 2 in OD Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial

Adjustable circular split die, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006 in, dimensions according to ANSI...

DORMER Round Die, Adjustable, 1/4 in Thk, 13/16 in OD Die, Right Hand Thread, High Speed Steel, Bright, Imperial, 1/4 in-28 Thread, UNF

Adjustable circular split die, for Unified National Fine thread UNF 1/4 in with 28 TPI, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of...

DORMER Round Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial

These dies are made of high speed steel with a 2A tolerance class, and 8° rake. They work well for hand or machine production of components less than 3xD in length.

DORMER Round Split Die, Right Hand Thread, Carbon Steel, Bright, Adjustable, Imperial

These dies are made of high speed steel with a 2A tolerance class and 8 deg rake. They work well for hand or machine production of components less than 3xD in length.

DORMER Round Split Die, Titanium Carbon Nitride, Bright

These dies are made of high speed steel with a 2A tolerance class and 8 deg rake. They work well for hand or machine production of components less than 3xD in length.