DORMER Jobber Length Drill Bit, Type N, General Purpose, Imperial, 51/64 in Drill, 20.24 mm Drill, 0.7969 in Drill, 152.4 mm Lg, 3 in Dp Cut, 2 -Flute, Spiral Flute

Standard length drill with 1/2 in reduced straight shank, diameter 0.7969 in (51/64) with an overall length of 6 in and flute length of 3 in according to DORMER standard with 118 deg point angle, HSS...

DORMER Jobber Length Drill Bit, Type N, General Purpose, Imperial/Metric, 2 -Flute, Spiral Flute, 118 deg Point

For general purpose drilling under a wide range of operating conditions and in various materials such as cast iron, steel and steel forgings. The steam oxide finish and surface treatment provide...

DORMER Machine Tap, Plug 1/2-13, Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, Plug Chamfer, H3 Thread Limit, 1/2 in Tap

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug 1/4-20, Spiral Point, Relieved, Aluminum Magnesium, Cast Iron, Copper, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2-Flute, 6007283

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug 1/4-28, Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNF, Plug Chamfer, 0.255 in Shank

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug 3/8-16, Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, Plug Chamfer, 3D Thread Limit

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug 3/8-24, Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNF, Plug Chamfer, 0.381 in Shank

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug 5/16-18, Spiral Point, Relieved, Aluminum Magnesium, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, Plug Chamfer, H3 Thread Limit

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead...

DORMER Machine Tap, Plug Chamfer, High Speed Steel, Bright Coated, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The taps can be used by hand or under...