Elbow, Elbow, 2 in, NPT End, 3000 lb, Forged, Steel

FS 3000# THD 45 ELL 2"

Open Reel Tape, Replacement, Steel

TAPE REEL 9150L 1/2 X 50'

Circular Saw Blade, Solid Surface, Non-Melt, 10 in Dia, 5/8 in Arbor, 72 -Teeth, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s solid surface blade can be used for cutting double-sided plastic laminate, plexiglass and solid surface materials such as dupont, corian, wilsonart, gilbralter and SSV, fountainhead, etc. It is suitable for table saws and radial arm-type machines...

Circular Saw Blade, Cross-Cut, 10 in Dia, 5/8 in Arbor, 50 -Teeth, 7600 rpm Max, 0.135 in Kerf, Carbide Blade

Amana’s combination ripping/cross-cut blades are designed to work in natural woods. The teeth consist of four ATB, followed by one square raker. Large gullets in the saw body allow for deeper cuts and improved chip ejection, despite a short pitch.

Circular Saw Blade, Double Face Melamine, 10 in Dia, 5/8 in Arbor, ATB Teeth, 80 -Teeth, 0.126 in Kerf, Carbide Cut Edge, Steel Blade

Amana’s melamine blade is specifically designed to cut melamine chip-free on both sides, as long as the table saw fence is square to the blade and the arbor is running true. The blade features increased thickness of the plate for added stability and...

Circular Saw Blade, All-Purpose, 10 in Dia, 40 -Teeth, 7600 rpm Max, 0.134 in Kerf, Carbide Cut Edge, Steel Blade

Amana’s Prestige saw blade is designed to produce excellent rips and crosscuts, in both solid wood and sheet goods, including melamine board. It features copper plugs to virtually eliminate vibration and dissipate heat and a unique gullet design for easy...

Circular Saw Blade, Fine Crosscut, Triple Chip, 10 in Dia, 5/8 in Arbor, 80 -Teeth, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s Triple-Chip fine crosscut saw blade can be used for trimming single or double-sided veneered and plastic laminated panels.

Circular Saw Blade, Fine Crosscut, 10 in Dia, 5/8 in Arbor, 80 -Teeth, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s Trim saw blade can be used to trim and size veneers and laminates in single sheets or stacks and can also be used on wood-veneered laminated panels.

Circular Saw Blade, Ripping, 10 in Dia, 5/8 in Arbor, TCG Teeth, 20 -Teeth, 0.126 in Kerf, Carbide Cut Edge, Steel Blade

Amana’s Euro-Rip is truly an exceptional blade, with a unique design that includes cooling slots and anti-kickback fingers. It is designed for ripping natural woods, along the grain, Its anti-kickback feature maintains safety while limiting chip...