Tap Wrench, Reversible Ratchet, 3-1/2 in Lg

The #161R Ratchet Tap Wrench for No. 0 to 1/4 in, Taps is designed to hold and turn taps—tools that cut threads on the inner surface of a hole or pipe—or other small tools, such as hand reamers and screw extractors.

DORMER Die Stock, Straight Handle, Imperial, Round Compatible Die Shape, 20 mm

Dormer’s die stocks assist with the hand operation of circular dies. They have 3 or 4 location screws, depending on size. Stock #DS6 has a 2- incapacity, while Stock #DS8 has a 3- in capacity.

Bolt Die, 5/8 in -18 Thread, UNF, Right Hand Thread, High Speed Steel, Bright

NF HS UNIVERSAL BOLT DIE 5/8*

DORMER Round Split Die, Titanium Carbon Nitride, Bright

These dies are made of high speed steel with a 2A tolerance class and 8 deg rake. They work well for hand or machine production of components less than 3xD in length.

DORMER Round Die, Adjustable, 1/4 in Thk, 13/16 in OD Die, Right Hand Thread, High Speed Steel, Bright, Imperial, 1/4 in-28 Thread, UNF

Adjustable circular split die, for Unified National Fine thread UNF 1/4 in with 28 TPI, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006 in, dimensions according to BS...

Die Head, Hand Threaded, 1/2 in, NPT, Right Hand Thread, Suitable For Hand-Held Power Drive

PIPE DIE HEAD OOR 1/2

DORMER Hand Tap,Plug M14x2, Straight Flute, Plug Chamfer, 4 -Flute, High Speed Steel, Bright Coated, 6H, 1-21/32 in Lg Thread, 3-19/32 in Lg, 0.429 in Dia Shank, D7 Thread Limit

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the...

Spiral Point Tap, Plug, #10-32, Plug, Stainless Steels up to 35RC Hardness, Steel, Imperial, UNF, #10-32 Thread, Plug Chamfer, 3 -Flute, High Speed Steel, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

DORMER Straight Flute Plug Taps, High Speed Steel, 4 Flute

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. Three-fluted taps have the greatest chip-holding capacity...