DORMER Machine Tap, Plug, #10-24, Spiral Point, Aluminum Magnesium, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2 -Flute

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

DORMER Hand Tap, Plug, M6 x 1 Thread High Speed Steel,

These general purpose taps can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the taps...

DORMER Hand Tap,Plug M14x2, Straight Flute, Plug Chamfer, 4 -Flute, High Speed Steel, Bright Coated, 6H, 1-21/32 in Lg Thread, 3-19/32 in Lg, 0.429 in Dia Shank, D7 Thread Limit

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the...

Spiral Point Tap, Plug, #10-32, Plug, Stainless Steels up to 35RC Hardness, Steel, Imperial, UNF, #10-32 Thread, Plug Chamfer, 3 -Flute, High Speed Steel, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

DORMER Straight Flute Plug Taps, High Speed Steel, 4 Flute

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. Three-fluted taps have the greatest chip-holding capacity...

DORMER Straight Flute Hand Tap, General Purpose, Imperial, 2B/3B, High Speed Steel, Bright Coated, Right Hand Cut

The most versatile taps for hand use or machine tapping in a wide variety of materials in through or blind hole applications. Available in 3 chamfer lengths; taper lead which is ideally for short through holes, plug perfect for deeper through holes and...

RIDGE Pipe Tap, Straight Flute, Imperial, Tapered Chamfer, Right Hand Cut, High Carbon Steel, Oxide Coated, 7/16 to 2-13/64 in

Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. All taps have taper of 3/4 in per foot.

DORMER Machine Tap, Plug Chamfer, High Speed Steel, Bright Coated, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The taps can be used by hand or under power and are suitable for tapping most materials,...

RIDGE Pipe Tap, Straight Flute, Imperial, Tapered Chamfer, 4 -Flute, Right Hand Cut, High Carbon Steel

Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. All taps have taper of 3/4 in per foot.