Elbow, Side Outlet, 90 deg Elbow, Malleable Iron, Galvanized

A 90 deg corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables and other rectangular structures.

Tee, Side Outlet, Tee, Galvanized, Malleable Iron

Most frequently paired with Type 20 to give a 90 deg corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting.

Pipe Cross, Three Socket, Cross, Malleable Iron, Galvanized

Most frequently used to tie uprights with horizontal tubes in three directions, all at 90 deg to the upright. The upright passes through the fitting.

Eye Fitting, Eye Fitting, Malleable Iron, Galvanized

A eye fitting used in conjunction with Type 83 fitting for gate hinges.

Pipe Cross, Four Socket, Cross, Malleable Iron, Galvanized

Most frequently used in multiple upright structures to tie a centre upright with horizontal tubes in four directions. The upright passes through the fitting.

Flange, Rail, Galvanized Iron, Gray

Kee Klamp components are available in seven sizes to suit different tube diameters. The fittings are iron castings manufactured to the requirements of EN 1562 and 1563. A KEE KLAMP component (sizes 5 to 9) can support an axial load of 900 Kg per set...

Swivel Socket, Socket, Malleable Iron, Galvanized

A Complete combination swivel fitting, variable through 170 degs. Note: Swivel fittings are not designed to resist bending loads. A structure should not be designed entirely of swivel fittings as they will not provide sufficient stability for the...

Flange, Medium, Gray

Kee Klamp components are available in seven sizes to suit different tube diameters. The fittings are iron castings manufactured to the requirements of EN 1562 and 1563. A KEE KLAMP component (sizes 5 to 9) can support an axial load of 900 Kg per set...

Crossover, Crossover, Malleable Iron, Galvanized

Designed to give a 90 deg offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the tube cuts, a continuous horizontal rail is used. Designed to give a 90 deg offset crossover joint. Frequently used on safety...