Railing Base, Standard Vertical, 1-1/2 in, 5.74 in Lg, Malleable Iron, Galvanized

Designed for fixing guardrail and balustrades to walls, parapets, steps and ramps. The upright cannot drop through the socket (see exception below) Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a...

Pipe Cross, Side Outlet, Adjustable, Aluminium, Mill, Cross, 1-1/4 in, 2-3/4 in Lg

Hollaender's Speed-Rail aluminum fittings make it easy to build hand rail and other pipe/fittings structures, with nothing but a saw, hex key and tape measure. The fittings are made of aluminum magnesium, and can be used with any pipe, including...

Tee, Clamp-On, 1-1/4 in, 90 deg, Case Hardened Steel, Iron, Galvanized, Gray , 1.72 in ID, 42.4 mm OD

Widely used for adding to and modifying existing structures. This performs the same function as a Type 10, but because of its open socket, it can be added to a complete structure. For an alternative fitting, see type A10. Type 25 should be used when a...

Single Socket Tee, 1-1/4 in, 60 deg, Iron, Galvanized, Gray , 1.72 in ID, 1.66 in OD

Kee Klamp's #29 30-60-deg single socket tees are designed as an alternative to the Type 12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30 deg and 60 deg. As an alternative,...

Railing Base, Standard Horizontal, 1 in, 3.86 in Lg, Malleable Iron, Galvanized

This fitting is designed for palm fixing guard railing and balustrading to walls, parapets, steps and ramps. Only available in size 6. The upright cannot drop through the socket (exception follows). Should an upright be required to pass through the...

Tee, TYPE E, Side Outlet, Aluminium, Mill, Tee, 1-1/4 in, 3.22 in Lg

Hollaender's Speed-Rail aluminum fittings make it easy to build hand rail and other pipe/fittings structures, with nothing but a saw, hex key and tape measure. The fittings are made of aluminum magnesium, and can be used with any pipe, including...

Tee, Side Outlet, Aluminium, Mill, Tee, 1-1/4 in, 3.22 in Lg

Hollaender's Speed-Rail aluminum fittings make it easy to build hand rail and other pipe/fittings structures, with nothing but a saw, hex key and tape measure. The fittings are made of aluminum magnesium, and can be used with any pipe, including...

Pipe Cross, Type E, Aluminium, Mill, Cross, 1-1/2 in, 4.44 in Lg

Hollaender's Speed-Rail aluminum fittings make it easy to build hand rail and other pipe/fittings structures, with nothing but a saw, hex key and tape measure. The fittings are made of aluminum magnesium, and can be used with any pipe, including...

Pipe Cross, Type C, Aluminium, Mill, Cross, 1-1/4 in, 4 in Lg

Hollaender's Speed-Rail aluminum fittings make it easy to build hand rail and other pipe/fittings structures, with nothing but a saw, hex key and tape measure. The fittings are made of aluminum magnesium, and can be used with any pipe, including...