Electric Control Assembly, Suitable For 12 VDC 190 Electric Control Assembly

Marco's #1019051 is a 12 VDC 190 Electric Control Assembly used with BlastMaster blasting pots.

Extra-Coarse Tape

Press-O-Film X-Coarse Grade (1.5-4.5 mils / 38-115 microns) Replica Tape is used with a gauge to measure the surface roughness ("profile") of blast-cleaned steel. It offers a unique replica technique...

Fluid Hose, 3/8 in, 3/8 in Id

Air Spray Hose is used to convey fluid from a paint pot to a conventional spray gun. Spraymaster® Air Spray Hose is made to stand up to most coatings and solvents, resist kinking, and has excellent...

Hose End, Reusable, Suitable For Pneumatic Control Line Fittings, 1/2 in NPT

3/16" ID REUSABLE HOSE END

Hose Union, Suitable For Pneumatic Control Line Fittings, 1/2 in NPT

3/16" ID HOSE UNION

Inlet Valve, Suitable For 121P Remote Control System, 1-1/2 in

Marco's complete inlet valve contains a petcock, two brass elbows, o-rings, body, plug and plug washer retainer, inner spring, bottom cap and gasket, outer spring, plug washer, adapter with...

Inlet Valve, Suitable For 6 cu-ft C-Series Blast Pot, 1 in

Marco's complete outlet valve includes a brass elbow, bonnet, piston/rod assembly, plug/spindle guide, plug/washer retainer, spring, body, washers, bolt, nipple, pipe plug and repair kit.

Inner Lens, Suitable For Apollo 600 Abrasive Blasting Respirator, PETG, 5-7/16 in wd, 14-3/8 in lg, 0.04 in thk

CLEMCO-ALTERNATE INNER LENS

Inner Lens, Two-Sided, Suitable For Apollo 600 Abrasive Blasting Respirator, Acetate, 5-5/8 in wd, 17 in lg, 0.02 in thk

This inner lens fits inside the window gasket on the Apollo 60 and Apollo 600 Breathing Air Respirator.