Sheave, 8 in OD Sheave, 1-3/8 in ID Sheave, Self-Lubricating Bronze Bushing, 1-3/4 in

McKissick’s Bronze Bushed Sheaves are equipped with SAE 660 Bronze Bushings for cold finished shafts with “Figure 8 in oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an additional charge. Roll...

Sheave, 8 in OD Sheave, 1-1/2 in ID Sheave, Self-Lubricating Bronze Bushing, Steel Sheave

McKissick’s Bronze Bushed Sheaves are equipped with SAE 660 Bronze Bushings for cold finished shafts with “Figure 8 in oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an additional charge. Roll...

Sheave, 10 in OD Sheave, 1-3/4 in ID Sheave, Self-Lubricating Bronze Bushing, Cast Iron Sheave

McKissick’s Bronze Bushed Sheaves are equipped with SAE 660 Bronze Bushings for cold finished shafts with “Figure 8 in oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an additional charge. Roll...

Snatch Block, Self-Locking, 1/2 in, 1-1/2 lb, 6 in OD Sheave, 1 in ID Sheave, Steel Shell Sheave, 6 in ht

Crosby’s self-locking snatch blocks have a semi-circular guard in the shell over the sheave that prevents the wire from slipping between shell and sheave. This feature also greatly strengthens the plates in the shell. A steel sleeve over the center pin...

Snatch Block, Self-Locking, 1/2 in, 2 lb, 6 in OD Sheave, 1 in ID Sheave, Steel Shell Sheave, 6 in ht

Crosby’s self-locking snatch blocks have a semi-circular guard in the shell over the sheave that prevents the wire from slipping between shell and sheave. This feature also greatly strengthens the plates in the shell. A steel sleeve over the center pin...

Sheave, 1/2 in, 8 in OD Sheave, Self-Lubricating Bronze Bushing, Forged Carbon Steel Sheave

McKissick’s Bronze Bushed Sheaves are equipped with SAE 660 Bronze Bushings for cold finished shafts with “Figure 8 in oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an additional charge. Roll...

Eye Grab Hook, Red, 30/43, Carbon Steel, Eyelet

Dixie’s heat treated eye grab hooks are used mid-link to connect directly to the chain through a coupling link. They are designed for ultimate strength equal to three times the working load limit, matching NACM specifications. They are made for use with...

Single Sheave Block, 685 lb, 2-1/2 in OD Sheave, 7/16 in Wd Sheave

Block Division got its start in 1962 by manufacturing the first all-steel wire rope blocks and sheaves for small-size wire rope. They use low carbon steel in their sideplates and turn down their sheaves by using cold-drawn bar stock. The bearings are...

Western Regular Block, Wood Sheave, 3/4 in

All of Crosby’s certified single blocks are proof tested to twice the working load limit and marked with a working load equal to half the resultant load. Double blocks are tested to twice the working load limit and marked with a working load equal to the...