Pump Impeller,Neoprene Blade

These are tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Recommendations are to use neoprene for most water-pumping applications and nitrile for pumping...

Seal Kit, 9023-0000

Jabsco's replacement seals are compatible with several of their pumps. Seal #92700 is compatible with pumps 1810, 1673 and 3890, among others.

Seal Kit, 92700-0080

Jabsco's replacement seals are compatible with several of their pumps. Seal #92700 is compatible with pumps 1810, 1673 and 3890, among others.

Self Priming Pump

Jabsco's #11810 bronze pump has a nominal flow rate of 42 lpm (11 gpm) and is self-priming from dry up to 3m (10ft). Small bilge debris presents no problem to this bronze bodied, flexible impeller...

Self Priming Pump, 11.3 gpm, 3/4 in NPT Inlet, 3/4 in NPT Outlet, 1750 rpm, Flexible Impeller, Pedestal Mount, 4 in wd

Jabsco's #3890 bronze pump has a nominal flow rate of 40 lpm (8.9 gpm) at 1500 rpm and is self-priming from dry up to 2.4m (7.8ft). It is constructed from marine quality bronze and stainless steel...

Self Priming Pump, 4 gpm, 3/8 in Inlet, 3/4 in Outlet, 115 VAC, 17.3 psi Max, Flexible Impeller, Any Position Mount

Jabsco's #12310 phenolic platic pump has a nominal flow rate of 4 USGPM, a maximum head 40ft (17.3 psi) and is self-priming from dry up to 2.4m (7.8ft). It can be used where corrosion resistant...

Self Priming Pump, 8.9 gpm, 1/2 in NPT Inlet, 1/2 in NPT Outlet, 1500 rpm, Flexible Impeller, Pedestal Mount, Bronze Body, Nitrile Impeller

Jabsco's #1673 bronze pump has a nominal flow rate of 40 lpm (8.9 gpm) at 1500 rpm and is self-priming from dry up to 2.4m (7.8ft). It is constructed from marine quality bronze and stainless steel...

Vacuum Switch, 1/4 in BSP, 12/24 VDC

The vacuum switch is an electrical device wired into the power circuit to an electric motor or electric clutch. The switch is mounted on the inlet side of the pump, between the pump and the liquid...