Push to Connect Fitting, Ball Seat, 1/4 x 1/8-27 in, FNPSM Swivel x Push-On Hose Barb End, 1/2 in Hex, 350 psi, -40 to 150 deg F, Brass, 1.41 in lg

Dixon's push-on female hose barbs are intended for use with Lok-On hose only. They require no hose clamps or ferrules, and will properly grip the Lok-On hose when they are pushed all the way in. Used correctly, the cut end of the hose will be concealed...

DIXON Washer Seal Spud, Ground Joint, Spud, Thread Wing Nut x FNPT End, 450 deg F, Steel, Zinc Plated, 1/2 to 2 in, b-0

Dixon’s Boss washer seal is not subject to corrosion and offers resistance to chemicals and steam found in manufacturing facilities. A precisely machined recess holds the seat firmly in place, allowing it to absorb harsh punishment. Boss couplings are...

Hose Mender, Machined, Male End, Carbon Steel

A machined-steel mender that repairs leaking hose quickly and easily. The short length of these menders makes them particularly suitable for use on hose reels.

Claw Coupling, 150 psi, 70 deg F, Iron

The Air King Claw Coupling has an included ferrule. Its universal design provides quick, easy and effective coupling of the air hose. Use of supplied safety clip guarantees the fittings are properly connected because the safety pin will not go through...

PARKER Nut, CPI, Compression End, 316 Stainless Steel, Nut

Parker CPI™/A-LOK® Instrumentation Tube Fittings are designed as leak-free connections for process, power and instrumentation applications. These single and two ferrule fittings are manufactured to the highest quality standards and are available in a...

PARKER Elbow, Triple-Lok Swivel Nut, 90 deg Elbow, 37 deg Male Flare x 37 deg Female Flare Swivel End, Steel, Domestic

Parker Triple-Lok 37 deg Flare JIC Tube Fittings and Adapters are a reliable leak-free metal to metal connection solution for most high pressure hydraulic applications.

Hex Nipple, Straight, MNPTF x Butt Weld End, 316 Stainless Steel

Brennan’s 04MP-BW hex nipples are designed for welding to metal hoses. They are made of 316 stainless steel.

PARKER Hydraulic Union, Triple-Lok, Union, 37 deg Male Flare x 37 deg Male Flare Bulkhead End, Steel, Domestic

Parker's 37 Deg Flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact...

PARKER Connector, Economical, Connector, 45 deg SAE Flare x Straight MNPT End, -65 to 250 deg F, Brass, Forged

Parker's 45 deg flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between...