MILWAUKEE Steel Hawg Annular Cutter, Threaded Hole, 2 in Dp Cut, 3/4 in Shank, Morse Taper Shank, Carbide Cut Edge, Carbide

Drill holes up to 3X faster than twist drill bits with the Milwaukee® 3/4 in Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2 in hole depth in steel, stainless steel, cast...

DORMER Combined Drill, Straight Shank, 120 deg Point, 82 deg, Right Hand Cut, High Speed Steel Cut Edge, Bright

This versatile tool is made of bright-finish high speed steel, with a 82 deg included angle. It is used to produce center holes in components which require machining between centers.

DORMER Jobber Length Drill Bit, General Purpose, Imperial, 6 in Lg, 3 in Dp Cut, 2 -Flute, Spiral Flute, 5/8 to 7/8 in

Jobber length drill with 1/2 in reduced tri-flat shank, with an overall length of 6 in and flute length of 3in according to ANSI standard with 118 deg point angle, HSS with bright + steam tempered finish for 4xD drilling without pecking in steel.

METABO Hammer Drill Bit, 4-Cutter, Round Cut Shape, Hole Drilling, 2 -Flute, Spiral Flute, Spline Shank, Carbide

Metabo's Spline shank bits are made with a 4-Cutter design. Their unique head design reduces friction in the hole for faster drilling, while large volume double spiral flutes provide rapid dust removal. Their patented flute design minimizes vibration and...

METABO Hammer Drill Bit, 4-Cutter, Round Cut Shape, Hole Drilling, 13 in Lg, 8 in Dp Cut, 2 -Flute, Spiral Flute

Metabo's SDS-Max bits are made with a 4-Cutter design. Their unique head design reduces friction in the hole for faster drilling, while large volume double spiral flutes provide rapid dust removal. Their patented flute design minimizes vibration and...

DORMER Jobber Length Drill Bit, General Purpose, Heavy Duty, Imperial, 2 -Flute, Spiral Flute, 135 deg Point

For use in cast iron base and steel base alloys, stainless steels, titanium, etc. These heavy duty bits have a 135 deg split point with a straight shank, and are made of high speed steel. Bits shown below are in fractional measures.

DORMER Jobber Length Drill Bit, General Purpose, Imperial, 6 in Lg, 3 in Dp Cut, 2 -Flute, Spiral Flute, 1 to 1-3/16 in

Jobber length drill with 1/2 in reduced tri-flat shank, with an overall length of 6 in and flute length of 3in according to ANSI standard with 118 deg point angle, HSS with bright + steam tempered finish for 4xD drilling without pecking in steel.

Taper Pin Reamer, Square Shank, 6 -Flute, Right Hand Cut, Most Metals Applicable, Straight Flute, Bright

Taper pin hand reamer with straight flutes and a square drive, large end diameter 0.2010 in with an overall length of 3.3/16 in, a flute length of 1.15/16 in and 0.1600 small end diameter, according to ASME B94.2-1995 standard for reaming pin holes with...

DORMER Jobber Length Drill Bit, General Purpose, Heavy Duty, Imperial, 2 -Flute, Spiral Flute, 118 deg Point

For general purpose drilling under a wide range of operating conditions and in various materials such as cast iron, steel and steel forgings. The steam oxide finish and surface treatment provide abrasion resistance and improved chip flow. Bits have a...