DIXON Pipe Nipple, Straight, Hose x MNPT End, 600 psi, 70 deg F, Steel, Zinc Plated, Domestic

Dixon’s zinc-plated 3500 steel nipples area made with a hose shank and Male NPT end.

DIXON Quick Connect Plug, Straight Through Interchange, FNPT End, -40 to 250 deg F, Steel

Dixon’s Straight-Thru couplers have no internal valves, so they can provide maximum flow with minimal pressure drop. They are interchangeable with Parker SST/BST, Foster FST and Hansen ST couplings.

DIXON Safety Blow Gun, Extended Nozzle, Bare Tool, 150 psi Working, 1/4 in FNPT Thread, Steel, Chrome Plated, Domestic

Dixon’s safety blow gun has a slender, 4-in extended nozzle that allows access to hard-to-reach places and holes as small as .200”. The variable output trigger enables the user to control air flow,...

DIXON Shank Coupling, Iron, Plated, Suction, Straight, NPSM End, 70 deg F, Coupling

Dixon’s short shank King line has straight thread (SIPT). The fittings below are made of plated malleable iron.

DIXON Shank Coupling, Straight Hose, Brass, 1-3/16 in Hex, 3/4-11-1/2 x 1/2 in, NPT x Barb End, 70 deg F, Coupling, 3.469 in Lg

Dixon’s precision-machined short shank fittings are available with several thread options.

DIXON Stem, 450 deg F, 2-1/8 in dia, Stem, 3/8 x 1/2 in, MNPT x Hose Shank End, 2-7/8 in Hex, 6-7/8 in Lg, Iron, Plated

Dixon’s Boss MS Series stem hose fitting is made of malleable ironl and connects hose to a female NPT threaded connection. It has a barbed end to create a tight seal on a hose when used with a Boss...

DIXON Stem, 450 deg F, Stem, MNPT x Hose Shank End, Iron, Plated

Dixon’s Boss MS Series stem hose fitting is made of malleable ironl and connects hose to a female NPT threaded connection. It has a barbed end to create a tight seal on a hose when used with a Boss...

DIXON Synthetic Lanyard, 19 in Lg, Synthetic Fabric Line

The use of an Air King safety clip or lanyard is necessary to assure that Air King universal couplings will not become accidentally disconnected. This guarantees the fittings are properly connected...

DIXON T-Bolt Clamp, 7/16 in, 7/16 in, 0.025 in Thk, 3/4 in Wd, Stainless Steel Band, Stainless Steel Bolt

Dixon’s T-Bolt clamps can be applied with a standard 7/16 in socket wrench, and are made with a stainless steel band and bolt. They have a torque rating of 50 in/lb.