Conveyor Shaft, Drive, 21/32 in Bolt, 4-1/2 in Lg Keyway, 1/2 in Wd Keyway, 1/4 in Dp Keyway, Steel, Protective Coating, 2 in Dia Shaft, 15 in Lg Shaft, 2 -Bolt

No. 1 drive shafts are normally used where standard end plates are furnished. They are jig drilled for ease of installation.

Conveyor Shaft, Steel, Protective Coating, End, 2 -Bolt, 1-1/2 to 3 in

End shafts serve to support the end conveyor section and are therefore usually supplied in cold rolled steel. End shafts are jig drilled for ease of assembly and close diametrical tolerances are held...

Conveyor Shaft, Steel, Protective Coating, End, 2 -Bolt, 2 to 3 in

End shafts serve to support the end conveyor section and are therefore usually supplied in cold rolled steel. End shafts are jig drilled for ease of assembly and close diametrical tolerances are held...

End Plate, Outside Trough, Suitable For Roller Bearing/Ball Bearing and Discharge Gate, Steel, 17-1/4 in wd, 17-3/8 in ht, 1/4 in thk

Outside trough ends with feet are used to support end bearing and cover. Drilling for ball bearings or roller bearings.

Fixed Spout, Plain Standard Discharge, Steel, Protective Coating

Standard discharge spouts are fabricated in proportion to the size and thickness of the corresponding trough. They can be furnished loose for attachment in the field or welded to the trough. The...

Fixed Spout, Plain Standard Discharge, Suitable For Discharge and Gate, 13 in Spout, 12 Bolt, 0.188 in thk Spout, 12 in dia Conveyor, Steel, 8-7/8 in wd

Standard discharge spouts are fabricated in proportion to the size and thickness of the corresponding trough. They can be furnished loose for attachment in the field or welded to the trough. The...

Flanged Gasket, Flange, Rubber, Red

Martin's TFG model flanges are used on trough ends.

Foot Trough End Flange, 12 in dia Conveyor, 1/2 in dia Flange Bolt, Steel, 2-3/4 in wd, 15 in lg, 1/4 in thk

Trough feet are used to support the trough at trough connections. They align and fasten the trough to the floor or an existing structure.

Hanger Bearing, Plain Sleeve, 2-1/2 in od, Uncoated

Cast iron bearings are used as support bearings for drive and screw conveyor shafts. While compatible with a 220, 216 and 19B style hangers, it requires a hardened shaft. This style bearing can...