Nipple Chuck Kit

Holds short or close nipples and studs for threading , For use with 300 Power Drive, 535 and 1822 (with adapter kit) and 1224 Threading Machines, Standard Nipple Chuck includes insert and 5 adapters (1/2 in, 3/4 in, 1 in, 1-1/4 in and 1-1/2 in). Nipple...

MILWAUKEE Drill Chuck Kit, Large Bearing, Morse Taper Mount, 3/4 in

This Drill Chuck Kit converts tools with a No. 3 Internal Morse Taper Spindle into a 3/4 in, 3-Jawed chuck. This system is compatible with the Milwaukee Super Hole Shooter Drill 2404-1 as well as Milwaukee Electromagnetic Drill Motors 4292-1 and 4297-1...

MILWAUKEE Drill Chuck Key, 3/8 in Chuck Key, 0.2344 in Dia Pilot, K-30, 48-66-0795, 48-66-0797, 48-66-4040, Suitable For 48-66-0795 and 48-66-0797 Chucks, Metal

This chuck key tightens the jaws of the 3/8 in capacity chuck 48-66-0795 and 48-66-0797. Key holder 48-66-4040 should be used to attach this chuck key to the cordset.

MILWAUKEE Taper Adapter

The Milwaukee® A Taper Bit Adapter lets you use A taper bits in your Spline drive rotary hammer for greater productivity.

Die Grinder Collet, Heavy Duty

This 1/4 in, collet is standard equipment on Milwaukee die grinder models 5192, 5194 and 5196 and securely holds 1/4 in, shank mounted points when tightened properly.

MILWAUKEE Drill Chuck, Keyed Bearing, Threaded Mount, 42 mm od, 1/2 in

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee...

MILWAUKEE Drill Chuck Key, 3/8 in Chuck Key, 1/4 in Dia Pilot, K-2, 48-66-0240, Suitable For 48-66-0240, 48-66-0805 and 48-66-0806 Chucks, Metal

This chuck key tightens the jaws of the 3/8 in capacity chuck 48-66-0240, 48-66-0805 and 48-66-0806. Key holder 48-66-4040 should be used to attach this chuck key to the cordset.

Groove Blade, Paper Cutt off, Stainless Steel

3M's Hand-Masker film blades are made of durable stainless steel, with a protective plastic blade guard. It is available in six- and twelve-inch widths.

MILWAUKEE Drill Chuck Key Holder, Metal

Milwaukee’s drill chucks are made for reversing drills, and are shipped with chuck keys.