Coupler plug, Interchange, Plug, Steel, MNPT End, 1/4 in

These steel coupler plugs are heat-treated to reduce wear on critical mating surfaces. They can accommodate up to 300 psi maximum working pressure. Thread – 1/4 in male NPT.

Pneumatic Coupler, 300 psi, Coupling, MNPT End, 1-1/8 in dia, 1/4 in

Lincoln’s universal coupler fits all Automotive/Tru-Flate, ARO and Industrial/Milton-style nipples for 1/4 in ID hose, and is capable of 300 psi maximum operating pressure. It has a 1/4 in NPTF inlet, and can handle maximum airflow of 38 scfm at 100 psi...

Pneumatic Coupler, 250 psi, Coupling, MNPT End, 11/16 in dia, 1/4 in

Each offers 250 PSI maximum operating pressure. An extra-long nipple stem and coupler body assures long service life and easy connections under severe operating conditions. Maximum air flow is 52 SCFM at 100 PSI. Length is 2-1/2 in (65mm), diameter is...

Pneumatic Coupler, Quick Disconnect, 300 psi, Coupling, Brass, 2.44 in Lg, Quick Disconnect Coupler x NPTF End, 0.92 in OD, 1/4 in, -40 to 250 deg F

Dixon’s Air Chief couplers are universally compatible with automotive, industrial and ARO 210 plug configurations. They are rated at 150 psi. These coupleres connect automatically, and shut-off when disconnected. Brass, 1/4 in.

Pneumatic Coupler, 250 psi, Coupling, MNPT End, 1/4 in

Each offers 250 psi maximum operating pressure. An extra-long nipple stem and coupler body assures long service life and easy connections under severe operating conditions. Maximum air flow is 52 SCFM at 100 psi Length is 2-1/2 in (65mm), diameter is...

Pneumatic Coupler, 500 psi, Coupling, Steel, 1/2 x 3/4 in, -40 to 250 deg F, Quick-Acting

Dixon’s Dix-Lock quick-acting couplings require a minimum of 5 psi to get a positive seal. They require Dix-Lock gaskets, which are made of Buna-N (Mfg. #QBM2).

Pneumatic Coupler, 300 psi, Brass, Quick Disconnect x FNPT End, 1/4 in-18, 3/4 in Hex

Air Chief Industrial Semi-Auto Couplers, 1/4 x 1/4 in

Pneumatic Coupler, Plug, Steel, Male End

Eaton’s 1000/400/500 Series is an Industrial Interchange pneumatic coupling that is rugged and reliable designed for use with compressed air, gases and liquids.

Pneumatic Coupler, 500 psi, Coupling, Steel, -40 to 250 deg F, Quick-Acting

Dixon’s Dix-Lock quick-acting couplings require a minimum of 5 psi to get a positive seal. They require Dix-Lock gaskets, which are made of Buna-N (Mfg. #QBM2).