GATES Duramaster Multi-Purpose Hose, Elastomer, Synthetic Textile, 2 in, 2 in Id, 2-1/2 in od, 200 psi Working, -40 to 200 deg F, Black , Import

Duramaster air and multi-purpose hose, from Gates, is designed for use in heavy-duty applications where medium resistance to air, water, heat and high viscosity oils is required. Hoses up to 1-1/2 in are made of EPDM and have a continuous-service range...

Garden Hose, 5/8 in, 5/8 in Id, 50 ft Lg, Vinyl

HOSE GARDEN 5/8X50

Airless Hose, High Performance, Coupled, 1/4 in Id, 50 ft Lg, 3300 psi Working, Fusion Bonded Epoxy, Zinc Plated, Blue , 1/4 in

BlueMax II is light weight and flexible, Its over 10% lighter weight and increased hose flexibility improves usability while spraying under pressure. It has minimal hose coil memory, meaning its superior flexibility and reduced coil memory provides ease...

Air Drill Hose, SBR, 1-1/2 in Id, 2.16 in od, 600 psi Working, -40 to 250 deg F

Goodall’s Hardrok hose is designed for heavy-duty use in mines, quarries and construction jobs. It offers a heavy-duty construction, heat-resistant tube, extreme abrasion resistance and flexibility, and kink resistance. The tube is made of an...

Air Drill Hose, Neoprene, 1-1/2 in, 1-1/2 in Id, 2.21 in od, 500 psi Working, -34 to 100 deg C, Gray Color

18MB hose, from Gates, is an extra heavy-duty, high pressure hose, designed for use on industrial, construction and pneumatic mining applications that require a wire braided hoise with an oil-resistant tube and abrasion-resistant cover. The tube is made...

Blasting Hose,Abrasive

Blastmaster® Xtreme-Duty® Abrasive Blasting Hose has a 5/16 in thick liner. The combination of the 25% thicker liner and advanced material formulation increases service life up to 150% over industry standard blast hose with a 1/4 in thick liner...

Fluid Hose, 3/8 in, 3/8 in Id

Air Spray Hose is used to convey fluid from a paint pot to a conventional spray gun. Spraymaster® Air Spray Hose is made to stand up to most coatings and solvents, resist kinking, and has excellent abrasion and tear resistance. Typical applications...

Twinline Hose, Pneumatic, 1/4 x 1/8 in, NPT End, 3/16 in Id, 7/16 in od, 200 psi Working

This twinline remote control deadman hose is designed for all makes and models of blast machines. It is built for durability and dependability and weighs less than 3 oz. per foot. It is constructed of tough abrasion-resistant EPDM rubber and reinforced...

Washdown Hose, Creamery, 3/4 in, 3/4 in Id, 1.22 in od, 200 ft Lg, 225 psi Working, -40 to 248 deg F, EPDM, White , Domestic

This white-cover hose, from Kuriyama, is designed for use with hot water up to 212 deg F, where steam is injected into the water for food handling or processing plant washdown service. The tube and cover are made of EPDM (type P), reinforced with a...