Turbine Pump, Close Coupled, 32-1/2 gpm, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 350 ft Max Head, 2 hp, 230/460 V, 60 Hz, 250 psi Max, 3450 rpm, 250 psi Case, 3 Phase

Shop BURKS exclusive unique regenerative type turbine pumps. Designed to handle clear water in addition to and many other non-abrasive, lower viscosity liquids on high pressure. As well as low capacity applications with the greatest possible efficiency...

Oil Lubricated Circulator, 3-Piece, 0.0833 hp, 115 VAC, 60 Hz, 125 psi Max, Centrifugal Impeller, 6-3/8 wd, 14-7/8 in lg, 1 Phase

The industry standard circulator for decades, series 100 is still the one by which most others are judged. With well over 10 million units installed, the series 100 remains a leader in applications such as hydronic heating and domestic hot water...

Self Priming Pump, 8.9 gpm, 1/2 in NPT Inlet, 1/2 in NPT Outlet, 1500 rpm, Flexible Impeller, Pedestal Mount, Bronze Body, Nitrile Impeller

Jabsco's #1673 bronze pump has a nominal flow rate of 40 lpm (8.9 gpm) at 1500 rpm and is self-priming from dry up to 2.4m (7.8ft). It is constructed from marine quality bronze and stainless steel for ruggedness and reliability. It handles hard and soft...

Self Priming Pump, 11.3 gpm, 3/4 in NPT Inlet, 3/4 in NPT Outlet, 1750 rpm, Flexible Impeller, Pedestal Mount, 4 in wd

Jabsco's #3890 bronze pump has a nominal flow rate of 40 lpm (8.9 gpm) at 1500 rpm and is self-priming from dry up to 2.4m (7.8ft). It is constructed from marine quality bronze and stainless steel for ruggedness and reliability. It handles hard and soft...

Self Priming Pump, 4 gpm, 3/8 in Inlet, 3/4 in Outlet, 115 VAC, 17.3 psi Max, Flexible Impeller, Any Position Mount

Jabsco's #12310 phenolic platic pump has a nominal flow rate of 4 USGPM, a maximum head 40ft (17.3 psi) and is self-priming from dry up to 2.4m (7.8ft). It can be used where corrosion resistant plastic material, self-priming, flow and debris tolerance is...

Self Priming Pump

Jabsco's #11810 bronze pump has a nominal flow rate of 42 lpm (11 gpm) and is self-priming from dry up to 3m (10ft). Small bilge debris presents no problem to this bronze bodied, flexible impeller pump. Its simple design means fewer wearing parts. Meets...

Turbine Pump, 8 gpm, 1 in NPT Inlet, 1 in NPT Outlet, 60 Hz, 100 psi Max, 3500 rpm, 250 psi Case, Base Mount

BURKS Series ET turbine pumps are available for capacities up to 8 gpm (0.50 lps) – pressures up to 150 psi (1034 kPa) and temperatures up to 225 deg F. (107 deg C), with standard mechanical shaft seal. Special shaft seals are available for higher...